Unibond repair metal and repair power 5 in epoxy for metal. Unibond repair metal is a polyester based filler that permanently repairs, fills, replaces and bonds metal including steel, cast iron, aluminium, copper and brass. Easily repairs leaks in water pipes, gutters and radiators. Will also bond metal to wood and masonry. Sets translucent and can be painted, sanded or drilled and is permanently heat resistant up to 100o. Use only on clean, dry surfaces remove all rust, dirt, oil, grease and paint prior to use. Waterproof and resistant to water, oil and petrol. Suitable for interior and exterior use. Mix and use carefully and thoroughly according to pack instructions in a well ventilated area. Wear suitable gloves. Sets hard in 10 minutes. Do not use at temperatures below 5o. Supplied in 130ml size.
Unibond Power 5 min epoxy Metal is a reactive, fast setting 2-component, non-shrinking, non-expanding epoxy based adhesive supplied as a twin chamber syringe. Ideal for strong bonding, fixing and replacing of metals/stone such as steel, cast iron, copper, aluminium, brass, concrete, bricks, ceramics and marble. Also suitable for bonding most metals/stone to other common surfaces such as wood, leather, metal, glass, ceramics and most plastics. Sets in 5 minutes, with an ultimate strength up to 130Kg/cm2. Metallic grey in colour when set. Can be sanded, painted or drilled once set. It is heat-resistant between -30° C and 150° C, water, oil and common solvent resistant and will withstand rough handling. For interior and exterior use. Supplied in 25ml size.
