0 Basket
0 Basket
Categories
Picture of Hood Mounted Air Filtration Cabinet A200H
Picture of Hood Mounted Air Filtration Cabinet A200H
Hood Mounted Air Filtration Cabinet A200H
Hood mounted air filtration system incorporating axial fan, cabinet and hood, particulate and carbon filtration. Ideal for extracting aerosal particulates and vapours, solder/adhesive resin fumes and general chemical gasses and vapours.
Products in this range
Prod. code Cat. code Description Ex. VAT In. VAT QTY.  
754-0200 A200H Hood Mounted Air Filtration System - Aperture 680x600mm
Pack Size
Model No: A200H
(Previous EK200H)
Extractor Type: Recirculating
Filter Area Size: 495mm x 372mm
20" x 15"
Air Volume through Filters: 355 m/hr
210 cfm
Ave Velocity at filter face: 0.5 m/sec
98 ft/min  
Fan Type: Axial
Fan Motor: 220/240V  50hz
40 watts  
Particulate filter: Yes
Carbon filter: Yes
Ducting and Sizes: No*
Odour removal: Partial**
Dimensions:
(width x height x depth)		 680mm x 600mm x 540mm
27" x 24" x 21"
Weight: 20Kg
44lb
Maximum Artwork size: A2***
Maximum 3D object size:
(width x height x depth)		 470mm x 370mm x 310mm
19" x 15" x 12"
* This unit is of a recirculating type and is not intended for use with ducting, however should heavier than initially intended use develop, ducting can be added as an option if necessary.
** Low level of solvent removal. Not for high concentrates of solvents etc. 
*** A2 drawing board can be insterted into the extraction unit at a convenient working angle.