0 Basket
0 Basket
Categories
Picture of Air Filtration Cabinet A300S
Picture of Air Filtration Cabinet A300S
Picture of Air Filtration Cabinet A300S
Picture of Air Filtration Cabinet A300S
Air Filtration Cabinet A300S
Air Filtration cabinet incorporating axial fan cabinet, particulate and carbon filtration.
This cabinet can be used in an upright postion for 3D applications or in a reclining
position for artwork spray adhesives and fixatives.
This model can be mounted onto the relevant hood to convert into A200H-D model.
Ideal for extracting aerosal particulates and vapours, solder/adhesive resin fumes
and general chemical gasses and vapours.
Products in this range
Prod. code Cat. code Description Ex. VAT In. VAT QTY.  
754-0300 A300S Air Filtration Cabinet - Aperture 580x390mm
Pack Size
Model No: A300S
(Previous EK400S)
Extractor Type: Recirculating
Filter Area Size: 495mm x 372mm
20" x 15"
Air Volume through Filters: 355m/hr
210 cfm
Ave Velocity of Filter face: 0.5m/sec
98 ft/min
Fan Type: Axial
Fan Motor: 220/240V 50hz
40 Watts
Particulate filter: Yes
Carbon filter: Yes
Ducting Sizes: No*
Odour removal: Partial**
Dimensions:
(Width x height x depth)		 508mm x 390mm x 370mm
23" x 15" x 14"
Weight: 11kg
24lb
Maximum Artwork size: A3
Maximum 3D object size:
(Width x height x dept)		 400mm x 250mm x 200mm
16" x 10" x 8"
* This unit is of a recirculating type and is not intended for use with ducting, however should heavier than initially intended use develop, ducting can be added as an option if necessary.
** Low level of solvent removal. Not for high concentrates of solvents etc.