0 Basket
0 Basket
Categories
Picture of Air Filtration Cabinet A200S
Picture of Air Filtration Cabinet A200S
Picture of Air Filtration Cabinet A200S
Picture of Air Filtration Cabinet A200S
Air Filtration Cabinet A200S
Air Filtration cabinet incorporating 2 axial fans, cabinet, particulate and carbon filration. This cabinet can be used in an upright postion for 3D applications or in a reclining position for artwork spray adhesives and fixatives. This model can be mounted onto the relevant hood to convert into A100H-D model. Ideal for extracting aerosal particulates and vapours, solder/adhesive resin fumes and general chemical gasses and vapours.
Products in this range
Prod. code Cat. code Description Ex. VAT In. VAT QTY.  
754-0202 A200S Air Filtration Cabinet with 2 axial fans Aperture 790x520mm
Pack Size
Model No: A200S
(Previous EK300S)
Extractor Type: Recirculating
Filter Area Size: 705mm x 502mm
28" x 20"
Air Volume through Filters: 710 m/hr
420 cfm
Ave Velocity at filter face: 0.5 m/sec
98 ft/min 
Fan Type: Axial
Fan Motor: 220/240V  50hz
80 watts
Particulate filter: Yes
Carbon Filter: Yes
Ducting and Sizes: No*
Odour Removal: Partial**
Dimensions:
(Width x height x depth)		 790mm x 520mm x 410mm
31" x 20" x 16"
Weight 19 kg
42 lb
Maximum Artwork Size A2***
Maximum 3D object size:
(Width x height x depth)		 650mm x 400mm x 250mm
25" x 16" x 10"
* This unit is of a recirculating type and is not intended for use with ducting, however should heavier than initially intended use develop, ducting can be added as an option if necessary.
** Low level of solvent removal. Not for high concentrates of solvents etc. 
*** A2 drawing board can be insterted into the extraction unit at a convenient working angle.