0 Basket
0 Basket
Categories
Picture of Air Filtration Cabinet A100H
Picture of Air Filtration Cabinet A100H
Air Filtration Cabinet A100H
Air Filtration Cabinet incorporating 2 axial fans, cabinet and hood, particulate and carbon filtration. Ideal for extracting aerosal particulates and vapours, solder/adhesive resin fumes and general chemical gasses and vapours.
Products in this range
Prod. code Cat. code Description Ex. VAT In. VAT QTY.  
754-0100 A100H Air Filtration Cabinet with 2 axial fans Aperture 960x760mm
Pack Size
Model No: A100H
(Previous EK100H)
Extractor Type: Recirculating
Filter Area Size: 705mm x 502mm
28" x 20"
Air Volume through filters: 710 m/hr
420cfm
Ave Velocity at filter face: 0.5 m/sec
98 ft/min
Fan Type: Axial
Fan Motor: 220/240V  50hz
80 watts
Particulate filter: Yes
Carbon Filter: Yes
Ducting and Sizes: No*
Odour Removal: Partial**
Dimensions:
(Width x height x depth)		 960mm x 760mm x 710mm
38" x 30" x 28"
Weight: 36kg
79lb
Maximum Artwork size: A1***
Maximum 3D object size:
(Width x height x depth)		 750mm x 470mm x 410mm
30" x 19" x 16"
* This unit is of a recirculating type and is not intended for use with ducting, however should heavier than initially intended use develop, ducting can be added as an option if necessary.
** Low level of solvent removal. Not for high concentrates of solvents etc. 
*** A2 and A1 drawing boards can be insterted into the extraction unit at a convenient working angle.